SkyTec Equipments
Vadodara, Gujarat
GST No. 24CFNPM3137C1ZO
Call 08048959133 80% Response Rate
Threading Tap
Prominent & Leading Manufacturer from Vadodara, we offer totem sb series spiral flute threading taps, totem carbide taps, totem hss threading taps and totem sa series spiral point taps.
Totem SB Series Spiral Flute Threading Taps
Price on Request
| Material Grade | best |
| Size | standard |
| Color | silver |
| Usage/Application | industry |
| Country of Origin | Made in India |
- The right hand spiral cut of the flutes acts to force the swarf away from the cutting teeth to the rear of the flutes and out of the hole
- Works better on materials which form long continuous stringy swarf, rather than chips.
- Consistent and tight thread tolerance
- Specific flute design for excellent chip evacuation
- Manufactured from High Grade HSSE & HSSE PM Steel
- Spiral flute taps can have slow or fast helix angles
Functions & Benefits:
- Can be used in both blind holes & also in through holes
- Radial through coolant taps
- Surface treatment to suit application material for greater wear & heat resistance
- Chips are pushed upwards due to spiral flute – Chip clogging avoided
- Full thread depth can be achieved and this design prevents tap breakage
- High operating parameters suitable for CNC / SPM Machines
Diameter: 3 mm - 25 mm
View Complete details
get quote
request a call back
Totem Carbide Taps
Price on Request
| Color | Silver |
| Material | standard |
| Packaging Type | box |
| Usage/Application | industry |
| Size | standard |
| Country of Origin | Made in India |
- Totem’s new range of Solid Carbide Taps, suitable for mass production with high wear resistance and extreme toughness.
- Special submicron grade carbide with high TRS state of art carbide grades.
- Chamfer geometry for uniform load distribution.
- Manufactured from High Grade HSSE & HSSE PM Steel.
- Operated at high speeds and are better at maintaining gauge qualification.
- Radial and axial through coolant taps.
- Low helix (15 Degree) new geometry available for short and long chipping materials.
Functions & Benefits:
- Can be used in both blind holes & also in through holes
- Special tooling attachments are used to get high accuracy on thread form
- Internal coolant option with radial or axial coolant outlet for improve swarf management and longer tool life
- Fewer tool changes due to high wear resistance, resulting in optimum machine output and high tool life
- Ideal for mass production with cutting speeds up to 4X higher compared to HSS-E taps
- High Speed & higher productivity results in less CPC
Diameter: 3 mm - 16 mm
View Complete details
get quote
request a call back
Totem HSS Threading Taps
Price on Request
| Color | silver |
| Usage/Application | industry |
| Brand | Totem |
| deal in | new |
| Country of Origin | Made in India |
- Totem Hand Taps is of three types bottom, second and taper leads, or individually
- Taper Taps have a lead of 7-10 threads at 5 degrees per side. The taper lead distributes the cutting force over a large area, and the taper shape helps the thread to start. They can therefore be used to start a thread prior to use of second or bottom leads, or for through holes.
- Second Taps have a lead of 3-5 threads at 8 degrees per side. They are the most popular and can be used for through holes, or blind holes where the thread does not need to go right to the bottom
- Bottom Taps have a chamfer (lead) of 1–2 threads, the angle of the lead being around 18 degrees per side. They are used to produce threads close to the bottom of blind holes
- Serial Form taps (HSS M42 and HSSE M42) available on request.
Functions & Benefits:
- Hand taps are straight flute general purpose taps which can be used for both machine and hand tapping
- Most economical tool for use on production runs
- Works best on materials that produce chips, or where the swarf breaks readily
- Available in Straight Flute, Spiral Pointed Taps, and Long Shank Taps
Diameter:
- Metric (coarse and Fine Pitch) M10 to M180
- Imperial 1/16"- 6"
- Pipe Thread 1/16"- 4"
View Complete details
get quote
request a call back
Totem SA Series Spiral Point Taps
Price on Request
| Color | standard |
| Usage/Application | industry |
| Brand | Totem |
| Material | standard |
| Country of Origin | Made in India |
- Spiral Point Taps is also known as ‘gun nose’ or ‘bull nose’ or ‘chip driver’.
- These taps are dimensionally the same as a hand tap, second lead, but have the cutting face ground back relative to the axis of the tap, for the lead portion.
- Material specific angular geometry ensures chips are pushed downwards
- Flute gives a better cutting action, requiring less power, and pushes the cut material forward, allowing free flow of coolant along the flutes to the cutting edge.
- Flutes are not ground as deeply as for hand taps, giving the tap greater strength. It can therefore be run at higher speeds.
- Manufactured from High Grade HSSE & HSSE PM Steel
Functions & Benefits:
- Thread Chamfer is of 4.5 threads & cutting load is distributed
- Shallow flute depth, hence stronger tap
- Spiral point taps are ideal for machine tapping of through holes, or blind holes where there is enough clearance beyond the threaded portion to accommodate the swarf.
- Chip clogging is eliminated as the tap pushes the chip forward and thus enhancing tool life.
- High operating parameters suitable for CNC / SPM Machines
Diameter: 3 mm - 25 mm
View Complete details
get quote
request a call back
EXPLORE MORE CATEGORIES